CHNWN - ELMER'S CRAFTBOND I, E420
- MSDS: CHNWN
- Manufacturer: BORDEN INC
- Product Name: ELMER'S CRAFTBOND I, E420
- National Stock Number: 8030-00N088090
Product Identification
Product ID:ELMER'S CRAFTBOND I, E420
MSDS Date:11/11/1995
FSC:8030
NIIN:00N088090
MSDS Number: CHNWN
Responsible Party
COLUMBUS, OH 43215
US
Emergency Phone: 614-431-6600
Info Phone: 614-431-6680
Cage: 07982
Contractor
Telephone: 614-225-6124
Cage: 07982
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN ABSORPTION/INGEST: NOT TOX
DERMALLY/ORALLY WHEN TESTED AS DESCRIBED IN 16 CFR PART 1500.3 (C)
(1) & (2). INHAL: NOT TOX BY INHAL WHEN TESTED AS DESCRIBED IN 16
CFR PART 1500.3 (C) (1) & (2 ). SKIN CONT: NOT AN IRRIANT WHEN
TESTED AS DESCRIBED IN 16 CFR PART 1500.41. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: EYES: NOT AN IRRITANT AS DESCRIBED IN
16 CFR PART 1500.42.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: IF ACCIDENTLY SWALLOWED, DILUTE BY DRINKING LARGE
QUANTITIES OF WATER. IMMED CONT POISON CONTROL CTR/HOSPITAL EMER
ROOM FOR ANY OTHER ADDITIONAL TREATMENT DIRECTIONS. EYES: IMMED
FLUSH W/PLENT Y OF WATER FOR AT LEAST 15 MIN. CALL MDIF IRRIT
PERSISTS. SKIN: FLUSH W/COPIOUS AMOUNTS OF WATER. SEE MD . INHAL:
REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL
RESP) .
Fire Fighting
Extinguishing Media:WILL NOT BURN UNLESS WATER HAS EVAPORATED. USE
MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT . IN CASE OF FIRE, WATER SHOULD BE USED TO KEEP
FIRE-EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL AND REMOVE TO
A CHEMICAL DISPOSAL AREA. PREVENT ENTRY INTO NATURAL BODIES OF
WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. STORE IN A COOL,
DRY PLACE. KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions:HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE AND
SAFETY PRACTICES.
Exposure Controls
Respiratory Protection:USE APPROPRIATE NIOSH APPROVED RESPIRATOR FOR
EXPOSURE OF CONCERN .
Ventilation:NO SPECIAL CONTROL MEASURES NECESSARY UNDER NORMAL
CONDITIONS OF USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17.5 @ 20C
Vapor Density:<1
Spec Gravity:1.09
pH:4.7
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:MILKY-WHITE LIQUID WITH MILD ACETIC AROMA
Percent Volatiles by Volume:40
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALINE MATERIALS.
Stability Condition to Avoid:NORMALLY STABLE AS DEFINED IN NFPA 704-12
(4-3.1).
Hazardous Decomposition Products:DECOMPOSITION PRODUCTS MAY INCLUDE
CARBON MONOXIDE, CARBON DIOXIDE.
Disposal
Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE AND DISPOSE
OF ACCORDING TO LOCAL, STATE, AND FEDERAL REQUIREMENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.